Adjustable gate hinge welded onto a post

Adjustable Hinges HGHA290 with a Weld on Washer

Adjustable Hinges with a Weld on Washer.

These Adjustable hinges can be adjusted after the gate has been installed simply use a spanner on the hex nut which even after welded turn you are only welding the washer,There are many ways you can use these hinges, These hinges HGHA290 have a 150 kgs capacity based on top and bottom hinge. A pair consist of one side top and bottom hinge. Passive Zinc coating gives these hinges a life of 15 Years. Ideal to be used with Swing gate motors.  

.
line7
welding torch icon
Adjustable Hinge with Weld on Washer
Code - HGHA290
$48.50 per Pair
steel post
Steel
Post
Adjustable Hinge
Long neck
Adjustable hinges with weld on washer
Weld on adjustable hinge with weld on washer to a steel post
requires a 25mm hole in gate post.
Thread Dia 19mm 
Gates up to 150 kgs

*Pair is Top and Bottom
One Side
Example of an Weld on Adjustable Hinge
allowing the gate to swing 180 Degs
  Related Products
Gate
Locks
Range of Gate Locks
Adjustable gate hinge with washer to weld
Adjustable gate hinge 150 kgs
  30mm 
  43mm 
  75mm 
ar001
20mm Thread Bar Dia
40
mm
Diameter2
Rotating Washer
Weldon
  60mm 
  43mm 
  60mm 
  80mm 
Diameter2
20mm Adjustable with rotating washer weldon
Cap. 150 kgs
Length of the hinge when tighten all the way in
Length of the hinge when fully extended
ar0031
ar00312
Adjustable hinges with plate
Adjustable
Hinge with backing plate
Adjustable hinges GUDGEON & TRUNNION HINGE
Adjustable Hinge
GUDGEON & TRUNNION HINGE
deliveryman
tnt logo
dhl logo
 
Delivering
Australia-wide
and WorldWide
Delivering
Around Australia Daily