90mm Enternal Sliding gate wheel x 2
4 lengths Floor Track each 3 Metres long- Total of 12 M
This Kit $ 352.00
4 x 3 Mtrs of Floor Track
1 x Track Joiner
1 x Gate Stopper
1 x Gate Holder
1 x Guide Rollers
2 x 90mm Enternal Sliding gate wheels
Buy this kit now
Guild Roller and Bracket
Sliding Gate Component Kit with 90mm Wheels - $352.00
Free x 48 pcs
Gate Stopper with Base 120mm high
Shipping Weight 0.69kg
Floor Track for Sliding Gates - 3mm thick Galvanized Steel
Material - Galvanized Steel able to withhold daily use in high traffic areas, able to accommodate Forklifts and Semi-Trailers all day.
With each 2 lengths we supply a track joiner made from Aluminum and is hollow in case you need to run wire under the track from on side to the other.
Each 3 Metre Length of floor track there are 16 Holes
Guide Rollers for Sliding Gate
2 of Adjustable Nylon rollers
Mounting Bracket Zinc Plated
Sliding Gate Holder for Gate up to 50mm Thick
Adjustable Height & Position
Attached at the closing end of the gate
Size 30mm long x 6mm dia
Require a 6mm masonry drill
Track fasteners - Zipfix
Above ground track fasteners simply drill through concrete. Hit the nail forcefully with a hammer and the aluminum sock will expand the track is in place. Only 19c each.
Floor Track Fasterners (ZipFix)
2 Lengths of Floor track have 32 holes for some type of fixing to the concrete.
You can use dynabolts 6mm dia and at bunnings they cost approx 79 cents each and that can cost you $37.92.
Sliding gate Kit with 90mm Wheels