Buy this kit now
This Kit $ 224.00
Floor Track 2 x 3M Total 6M
2 x 3 Mtrs of Floor Track
1 x Track Joiner
1 x Gate Stopper
1 x Gate Holder
1 x Guide Rollers
2 x 90mm Internal Sliding gate wheels
Floor Track ?
Guild Roller and Bracket
Free x 24 pcs
Sliding Gate Component Kit with 90mm Wheels - $224.00
Gate Stopper with Base 120mm high
Shipping Weight 0.69kg
1 Gate Stopper
Running or Floor Track for Sliding gates
Each 3 Metre Length of floor track there are 16 Holes
Floor Track for Sliding Gates - 3mm thick Galvanized Steel
Material - Galvanized Steel able to withhold daily use in high traffic areas, able to accommodate Forklifts and Semi-Trailers all day.
With each 2 lengths we supply a track joiner made from Aluminum and is hollow in case you need to run wire under the track from on side to the other.
2 x lengths 3M
Sliding Gate Holder for Gate up to 50mm Thick
Adjustable Height & Position
Attached at the closing end of the gate
1 Gate Holder
Guide Rollers for Sliding Gate
Rollers - Nylon
Bracket - Zinc Steel
1 Guide bracket with rollers
Double Bearing support Max capacity weight 260 kg per wheel
Single Bearing support Max capacity weight 210 kg per wheel
Sliding Gate Wheel 90 Dia Class A
Rated to carry 210kgs
2 x Sliding gate wheels
Track fasteners - Zipfix
Above ground track fasteners simply drill through concrete. Hit the nail forcefully with a hammer and the aluminum sock will expand the track is in place. Only 19c each.
2 Lengths of Floor track have 32 holes for some type of fixing to the concrete.
You can use dynabolts 6mm dia and at bunnings they cost approx 79 cents each and that can cost you $37.92.
Size 30mm long x 6mm dia
Require a 6mm masonry drill
Floor Track Fasterners (ZipFix)
Sliding gate wheel x 2
Internal wheel Kit - 90mm Wheels