Flush head dynabolt
free standing post
harry
gerry
There are 3 types of steel gate posts:
In-ground gate posts
Free Standing gate posts
Wall gate posts
Post with Plates welded for free Standing
Plastic caps hides the holes required to attached the post to walls
Gate post with welded plates on the bottom
Free Standing Post
Wall Post
bolts to brick walls
In-ground Post
Part
Number
Tube
Size
Wall
Thickness
mm
Price
Per Metre
Gate Post with a 32mm hole
Steel Caps on a gate post
Steel Post per Metre
Galvanized
Price does not include Cap or Plates
All Price includes GST
Welded steel tops are also available, at any size, for only $10 per post.
Gate Motor mounting brackets can also be welded on,
but an additional charge is applied.
We can deliver 1 or 100 posts,
Australia wide!

delivery of post
202012g 20x20 1.2 8 $2.32 $14.20
202016g 20x20 1.6 8 $2.94 $17.25
252512g 25x25 1.2 8 $3.16 $17.16
252516g 25x25 1.6 8 $3.82 $22.63
303016g 30x30 1.6 8 $4.55 $26.64
404016g 40x40 1.6 8 $6.38 $34.45
404020g 40x40 2.0 8 $7.72 $47.52
505016g 50x50 1.6 8 $8.10 $41.85
505020g 50x50 2.0 8 $9.95 $59.45
505025g 50x50 2.5 8 $11.85 $73.95
505030g 50x50 3.0 8 $15.13 $86.96
656516g 65x65 1.6 8 $10.85 $63.54
656520g 65x65 2.0 8 $13.15 $79.24
656525g 65x65 2.5 8 $16.25 $97.95
757520g 75x75 2.0 8 $14.95 $91.83
757525g 75x75 2.5 8 $18.95 $113.95
757530g 75x75 3.0 8 $23.42 $135.84
909020g 90x90 2.0 8 $21.23 $109.65
10010020g 100x100 2.0 8 $24.65 $114.45
10010025g 100x100 2.5 8 $25.88 $154.45
10010030g 100x100 3.0 8 $29.95 $183.85
Steel post with Steel Caps Welded to the top
Hint
for in-ground posts
Gate posts should be at least 1/3rd in the ground.
To determine the correct length of the gate post, divide the height of the gate into 3, and then add it to the result.
Example:
1650mm divided by 3 = 550, at which you add the original 1650mm, resulting a gate post size of 2200mm.
Round caps for dynabolt
holes
TIP... (Want a better Anchor Bolt)
There's nothing worst attaching a post to the wall and the thread has run out (B) and you are left with a dynabolt spinning and not grabbing, We have found a dynabolt (A) that pulls right up and doesn't leave the thread sticking out
(A)
Flush head Dynabolt
Flush Head Dynabolt - 12mm x 65mm lenght
pack of 10 pcs  P/N FS434 -  $ 19.50
Base Post Covers - Pressed Steel - Zinc Plated
Steel Base Plates For Post
Post Base plate 150x150x8
Steel Base Plates Zinc  For Welding onto the base of post
 
Gal Steel Post plates to weld on
to Fit 100x100  tube
P/N SE812   weight =215g
$ 5.50 each
post end caps weld on
Length
(M)
Gal Steel Rectangle Hollow Section
Gal Steel Square Hollow Section
Price
Per Length
weld cap plate on a post

Steel Gate Post & Plates

Free shipping
post cover installed
More information ET135
Steel Post made and Cut to Order
X
More information ET135
382516g 38x25 1.6 8 $4.82 $28.85
502516g 50x25 1.6 8 $5.95 $35.11
755020g 75x50 2.0 8 $12.24 $75.54
804016g 80x40 1.6 8 $11.75 $61.52
804020g 80x40 2.0 8 $13.65 $88.85
1005020g 100x50 2.0 8 $14.85 $89.84
1005025g 100x50 2.5 8 $18.84 $113.65
1005030g 100x50 3.0 8 $21.68 $135.32
1505020g 150x50 2.0 8 $23.42 $134.63
1505025g 150x50 2.5 8 $28.15 $142.58
1505030g 150x50 3.0 8 $30.26 $183.85
501010g 50x10 1.0 7.32 $5.25 $23.53
751610g 75x16 1.0 7.32 $6.82 $38.23
 
Delivering
Australia-wide
and WorldWide
Delivering
Australia-wide
and WorldWide
Delivering
Around Australia Daily