Design - Fabrication - Installation - Repair - Service - Sales - Maintenance - Spare Parts
We Ship Australia Wide
1300 121 666
DIY Gate Frames with Recesse
DIY gate frames with Recess
Ideal for
Timber, plywood, cement sheeting, Colourbond, Wire or sheet steel
Ideal for
Timber, plywood, cement sheeting, Colourbond, Wire or sheet steel
DIY gate frames are supplied with a galvanized finish, but powder coating is also available, at extra cost!
This DIY gate frame has a recess in the middle, so timber cladding can be applied to both sides.
Thanks to the recess, you can easily insert colorbond sheets, giving your gate a complete new look and style!
Height
of the Gatel
l
l
l
l
l
l
V
Width---->
The table below shows whole dollars.
Here’s an example on how to use the table below:
If you need a 1432mm x 1664mm DIY gate frame, then select 1400mm x 1600mm from the table below, and check the corresponding price. That’s the price you have to pay!
Here’s an example on how to use the table below:
If you need a 1432mm x 1664mm DIY gate frame, then select 1400mm x 1600mm from the table below, and check the corresponding price. That’s the price you have to pay!
DIY Gate Frames are made from 50x50mm Galvanized steel and supplied in a Galvanized finish - Powder Coating is an extra charge
50x50 Gal Steel
All frames with recesses are made of 50x50mm galvanized steel, and the recess is made of 38x25mm galvanized steel. This leaves approximately 25mm for the thickness of the timber.
