Design - Fabrication - Installation - Repair - Service - Sales - Maintenance - Spare Parts
We Ship Australia Wide
1300 121 666
DIY Gate Frame What Do I Get
Hinges are
welded on
to the Frame
welded on
to the Frame
This D-Latch comes standard with each DIY gate frame
Or
You can upgrade the
D-Latch to a Lokk Latch Pro
for only $75.00 (RRP $138.00)
Or
You can upgrade the
D-Latch to a Lokk Latch Pro
for only $75.00 (RRP $138.00)
Slide Pad Bolt
Mitered corners and all welds grinded flat
Support bars can be welded
both vertically or horizontally,
so be sure to let us know which way your timber is going to be attached.
both vertically or horizontally,
so be sure to let us know which way your timber is going to be attached.
The above gate frame is made from 50x25 galvanized steel, and it’s 1800mmH x 1533mmW.
Frames over 1500mmH x 1500mmH are made from 50x50 galvanized steel.
Remember that we make the frame to any specifications you desire, and we can make it swing either left or right, and in or out.
Frames over 1500mmH x 1500mmH are made from 50x50 galvanized steel.
Remember that we make the frame to any specifications you desire, and we can make it swing either left or right, and in or out.
What is included with every DIY GateFrame
Each frame is made from Galvanized Steel
Each frame is made from Galvanized Steel
Lock Box - If you require a Mortise lock.
Lock boxes can be welded into any frame for only $85.
Lock boxes can be welded into any frame for only $85.
!! FREE !!
As a limited time offer, we are throwing in a nut driver, free of charge!
As a limited time offer, we are throwing in a nut driver, free of charge!
If you are attaching the hinges to a timber post, then we will supply you with the couch screws you need.
Included with every DIY gate frame is the correct number of self drilling tek screws, to attach the sliding bolt and screw your hinges to the steel post.
Drop bolts are not supplied with pedestrian gates under 1200mm wide, but they can be ordered as extras, at a cost of $6.00 (450mm long).
Frames that are over 1200mm wide have drop bolts included in the frame price.
Frames that are over 1200mm wide have drop bolts included in the frame price.
Do You require self tapping screws
Yellow/Zinc or plain galvanized $7.70 per 100
Phillips Head Countersunk Self Tapping Screws
Yellow/Zinc or plain galvanized $7.70 per 100
Phillips Head Countersunk Self Tapping Screws
Or
You can upgrade the steel hinges to
Self Closing Hinges Plastic hinges can be adjust to suit the weight of the gate Max weight of the gate 20 kg
upgrade price $32 pair
Self Closing Hinges Plastic hinges can be adjust to suit the weight of the gate Max weight of the gate 20 kg
upgrade price $32 pair
All pictures are watermarked - "Copyright 2/1/09 by Gatesplus